Part of the American Dream is a space that is yours to mark out. In order to enhance this sense of space, several individuals build privacy fences across property lines. Privacy fences provide homeowners with a lot of advantages. A good privacy fence prevents noise from passersby and nosy neighbours and enhances privacy. Privacy fences, such as your garbage dumpster or your HVAC pump, can also be used to obstruct a poor view.
Materials for fencing
Most fences for privacy are made of wood, vinyl, or occasionally stone. A privacy fence may also be built using a hedge, but a landscaper and not a fence contractor should instal this type of fence. Wood and vinyl are wonderful materials that, if properly installed and secured, require minimal maintenance. To maintain their structure, wood fences may need to be painted or stained. Vinyl fences, while less sturdy than a solid wood fence, are much longer lasting. Shrubs or climbing vines planted around it may also hide the fence. If you wish to learn more about this, visit Las Vegas Fence Contractor Association.
Constructing a fence
If you have flat land and a clear road, private fences are not terribly hard to build on your own. The configuration of the fence should fit your property’s aesthetic. You can help determine which form is the best for your area by talking to a contractor and checking your HOA rules.
Making sure the posts are uniformly spaced, vertical, and in line with the other posts is the most challenging part. Without even posts, runners between the posts would be very difficult to mount. You would want to do more research on how to rectify this or contact a fence contractor who can direct you or build a fence for you if your property won’t allow you to go down a straight path with your fence.
Please make sure you have also called local utilities to mark all the pipes. You don’t want to have an terrible crash and costly fix from hitting a utility line! To avoid the posts from being heaved out of the ground over time, all posts should be sunk below the frost line.
Nail large running boards about 1 ft off the ground and 1 ft from the top of your fence until the posts are sunken. These provide the slats with structural support. To match the contours of the field, cut the slats and nail them to the runners. Make sure your nails are not going to penetrate through the runner all the way. Per runner, two nails per slat should be appropriate. As you like, paint or stain the wood and your fence will be full.