A modern paver patio is a very useful complement to every home built in your back yard. Most people will appreciate a nicely landscaped area where they can spend fun evenings and eat out. Unfortunately this is tough to do without a patio. When deciding what kind of material to use for your new patio, there’s only one alternative that’s cost-effective, attractive and sturdy.Interested readers can find more information about them at Phoenix Patio Pavers
Pavers provide a wide range of texture and colour to homeowners. However, because of the sinking and freezing thaw they are much more resistant against cracking than poured concrete slabs. The reason they don’t crack like their counterparts on concrete slabs is because each paver is their own miniature slab. The bigger a concrete slab, the more brittle it is because it is longer and wider than thick. Pavers are small, single bricks that are about as thick as long or wide. The pavers are therefore much thicker, denser and can handle heavier loads than concrete slabs. Pavilions may also flex during freeze thaw periods because they interlock. By contrast, concrete slabs can’t flex, but crack instead.
You need to remember size , shape, position and elevation while considering a new paver patio. Your backyard is ideally relatively flat, partly shaded, and large enough to accommodate a patio. To excavate the field to be paved and to put in foundation material and pavers, the paving contractor would need to access. Most patios are built underneath with four inches of base material, some sand and then the pavers. Determine where you want the height of the patio surface to be, then measure an extra six to seven inches below that to get an understanding of how far the trench will need to go. A modest patio of two hundred square feet will need seven thousand pounds of base material and a thousand pounds of sand to build a solid base correctly for the pavers to be built on. Base materials are regionally different but recycled concrete tends to be the best.